How Do I Tie The Uni Knot? [Simple Ways + Video Tutorial]

How to tie uni knot

Are you struggling to tie a Uni Knot?

Well, you’ve come to the right place.

In this article, I will take you through the steps of tying a Uni knot.

When it comes to tying the Uni knot, it doesn’t matter whether you’re an experienced angler or a newbie.

As an angler, it is a must to learn how to tie various fishing knots, and the Uni knot is one of the popular knots most anglers use.

There are many benefits of learning how to tie the Uni knot and utilize it in your fishing adventures; we will discuss that in this article.

Uni Knot: How to Tie Like A Pro

Methods of Tying a Uni Knot

The Uni knot is pretty simple to tie if you master it. That is why I will be taking you through these methods and steps of tying a Uni.

Method 1

To single-line method

Step 1

Get a line and a hook. Insert the tip of the line through the hook eye and drag to about 6-8 inches, and bend it to the right so it runs parallel to the long-running line, with the shorter one still maintaining a 6- or 8-inches length.

Step 2

Using your left hand, hold both parallel lines near the hook eye and curve your 6inches line holding the end, then place it between your left fingers holding both lines near the hook eye to form a loop with the tag end facing up.

To get a clearer understanding, watch this tutorial video.

Step 3

Take the tag end, pass it underneath the two lines into the loop you have created, and wrap it around it, repeating the process up to 5 or 7 times.

Make sure your left-hand hold both lines while wrapping to keep them together.

Step 4

After completing the Wraps, pull the tag end with your right hand while the left-hand holds the hook.

Continue pulling on a steady pace till your wraps come holding together. It would be easier to pull together if you lubricate the knot.

Step 5 

Now you have formed a loop between the hook eye and the uni knot.

To get rid of the loop and make the knot sit tight on the hook eye, grab the running line with your right and hold the hook, then begin to pull the knot until it rests tight against the hook eye.

Finally, cut off the excess tag line to get a clean straight uni knot.

Method 2

This second Uni knot method is often referred to as the two lines or double.

Step 1

Get two lines that are of the same length.

Then, run the two ends of the line on each other in a parallel line; both lines overlapping should be about 8 inches long.

Step 2

Grab the middle of the overlapping lines with your left hand.

Then, use your right hand to place the other line tag end facing right on the parallel line just like you did for the single line to form a loop with the tag end facing up.

Then, wrap it around it, repeating the process up to 5 times.

Step 3

Pull the tag end with your right hand while the left holds the other side of both lines. Continue pulling on a steady pace till your wraps come holding together, just like the first method.

Step 4

Hold the tag facing the opposite direction with your left hand and place it on the parallel line just like the one facing the other right direction to form a loop with the tag end facing up.

Wrap it around it, repeating the process as you did with the other side, but the tag end faces left this time. Remember, they should face opposite directions.

Step 5

Pull the tag end with your other hand while the right holds the other side of both lines, and pull until your wraps come holding together like the right side.

Now you have two uni knots tied on one strand.

Step 5

To bring the 2 knots together, hold the main line, not the tag, and pull in opposite directions till they hit each other to form a nice, tightened close-up.

Next, cut the excess tag off, and there you have it, your two lines or double uni knot.

If you are not too good at using your left hand, all you need to do is flip the whole standing line to tie the second knot after tying the knot facing right.

You will get the same result. For better clarification, watch this video tutorial.

What You Should Know About Uni Knot

The Uni knot or Grinner knot is a knot usually used on multiple hook fishing lines.

In other words, it is one of the many methods of tying knots that allows one to attach additional baits, jigs, and flies to a fishing line. It is great for fly fishing.

This knot is only one of the different types of knots in the fishing knot kinds.

The uni knot is strong and effective because of the way it is tied.

Therefore, it offers a great advantage and ensures that it holds well and lasts long.

The uni knot is one knot that is easy to tie and a good breaking strength

What is a Uni Knot used for?

The uni knot is an excellent fishing knot for connecting two lines together if you don’t intend to use a swivel.

You can use this knot with a braided or monofilament line, and it works fine.

It is a multipurpose fishing knot that you can use for joining lines, attaching lures, and attaching a fishing line to the pavilion of a reel because of the sliding loop.

When using a braided line, make sure to make several extra wraps in the braided line.

Benefits of tying a Uni knot

1) The Uni knot is very strong with breaking strength

2) The Uni knot is easy to tie

3) You can use the Uni knot in many types of fishing situations

4) You can use the Uni knot to connect any type and size of a line, no matter the diameter.

4) The Uni knot is an excellent choice for many angling applications or when trying to tie a line to a terminal tackle.

Additional Information

There are some common mistakes some new anglers make when tying the uni knot, which negatively impact the efficiency of the knot.

Not pulling to ensure you tighten a uni knot properly is one of the most common mistakes anglers make.

If the knot is not tightened adequately before the tag end is cut off, the line might be loosened and not locked into place. It results in the coils sliding off.

So, confirm that the knot is tightened properly before cutting off the tag ends.

To avoid situations where you lose your catch, keep tension and pressure consistent or steady on the fishing line from the beginning to the end.

Conclusions

The uni knot is a great knot, and also, it is a little easier to tie than other knots, such as the FG knot, and blood knot.

So, with the right uni knot method, uni knot tutorial, and little practice, it will take you (irrespective of your expertise or experience) a minute or less to tie.

Also, scroll down to read more about all the fishing knots and their uses.

Frequently Asked Questions (FAQs)

Should I learn how to tie a uni knot?

As an angler, it is a must to learn how to tie various fishing knots, and the uni knot is one of the popular knots most anglers use.

What are the benefits of tying a uni knot?

There are many benefits to learning how to tie the uni knot and utilize it in your fishing adventures. The Uni knot is very strong. The Uni knot is easy to tie. You can use the Uni knot in many types of fishing situations. You can use the Uni knot to connect any type and size of a line, no matter the diameter. The Uni knot is an excellent choice for many angling applications or when trying to tie a line to a terminal tackle.

What is the uni knot used for?

It is a multipurpose fishing knot that you can use for tying two lines together if you don't intend to use a swivel and also to attach a lure.